VUE AWD V6-3.5L VIN 4 (2004)
The control module ID number list above provides a method for determining which module is not communicating. A module with a class 2 serial data
circuit malfunction or which loses power during the current ignition cycle will have a Loss of Communication DTC set by other modules that depend on
information from that failed module. The modules that can communicate will set a DTC indicating the module that cannot communicate.
Diagnostic Order
When more than one Loss of Communication DTC is set in either one module or in several modules, diagnose the DTCs in the following order:
1. Current DTCs before history DTCs unless told otherwise in the diagnostic table.
2. The DTC which is reported the most times.
3. From the lowest number DTC to the highest number DTC.
Conditions for Running the DTC
The following DTCs do not have a current status:
^
B1327
^
B1328
^
U1300
^
U1301
^
U1305
AND
^
The vehicle power mode requires serial data communication to occur.
Conditions for Setting the DTC
A node alive message has not been received from a module with a learned identification number within the last 5 seconds.
Action Taken When the DTC Sets
