saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

OnStar(R) - Generation 6 Service Procedures|Page 224 > < OnStar(R) - Generation 6 Service Procedures|Page 222
Page 25
background image

Conditions for Running the DTC

Ignition is in RUN or ACC position

System voltage is between 9.5 - 15.5 volts.

The above conditions are met for more than 1 second.

Conditions for Setting the DTC

The VCIM does not detect the presence of a cellular antenna for more than 1 second.

Action Taken When the DTC Sets

The vehicle is unable to connect to the OnStar(R) Call Center.

The OnStar(R) status LED turns red.

Conditions for Clearing the DTC

The VCIM detects the presence of a cellular antenna.

A history DTC clears after 50 malfunction-free ignition cycles.

Circuit/System Testing

Perform a visual inspection as shown above in order to verify that the cellular antenna and the cellular antenna coupling assembly are not damaged. If
any components are damaged replace the assembly.

DTC B2476 or B2482

DTC Descriptors

OnStar(R) - Generation 6 Service Procedures|Page 224 > < OnStar(R) - Generation 6 Service Procedures|Page 222