VUE AWD V6-3.5L VIN 4 (2004)
Oil Level Warning Indicator Control Module: Service and Repair
Oil Flow Control Module Replacement
Removal Procedure
1. Raise and support the vehicle.
2. Remove the oil filter.
3. Remove the oil flow control module.
4. Clean and inspect the oil flow control module sealing area.
Installation Procedure
1. Install a NEW oil flow control module screen.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the oil flow control module and bolts.
^
Tighten the bolts to 22 Nm (16 ft. lbs.).
3. Install a new oil filter.
