VUE AWD V6-3.5L VIN 4 (2004)
1. Remove any dirt, grease, or other contaminants from the mounting surface.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the SDM to the vehicle with the nuts.
Tighten the nuts to 10 N.m (89 lb in).
3. Install the console assembly.
4. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 8.
IMPORTANT: If you do NOT perform the BCM programming procedure, the vehicle option content information which is read by the BCM may be
incorrect and a DTC B1001 Option Configuration Error will set in both the SDM and the BCM. This will illuminate the AIR BAG telltale.
5. Reprogram the BCM. See: Testing and Inspection/Programming and Relearning
