VUE AWD V6-3.5L VIN 4 (2004)
17. Remove the comfort guide, if equipped.
18. Remove the seat back cover.
19. Feed the seat belt webbing, the bezel, and the anchor plate through the cover.
20. Remove the retractor cover fasteners.
21. Remove the rear shoulder belt fasteners.
22. Pull upward on the retractor unit cover and remove the retractor from the rear seat back frame.
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: Apply Permatex(R) 24200 on all restraint fasteners prior to installation.