VUE AWD V6-3.5L VIN 4 (2004)
Seat Belt Height Adjuster: Service and Repair
SEAT BELT HEIGHT ADJUSTER REPLACEMENT - FRONT
REMOVAL PROCEDURE
1. Remove the center pillar upper garnish molding.
2. Remove the fasteners from the shoulder belt height adjuster. Remove the height adjuster.
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: Apply Permatex(R) 24200 on all restraint fasteners prior to installation.
1. Install the shoulder belt height adjuster with the fasteners.
Tighten the fasteners to 40 N.m (30 lb ft).
