VUE AWD V6-3.5L VIN 4 (2004)
housing (1).
The actuator blade inside the ignition cylinder case housing must be in the ACC position in order to install the ignition lock cylinder as shown in the
above illustration.
Inspect the position of the actuator blade inside the ignition cylinder case housing. If the actuator blade rotated when cleaning the ignition cylinder case
housing, then reposition the actuator blade to the ACC position using needle nose pliers.
Wet a shop cloth with GM Brake Cleaner, P/N 12378392 (in Canada, 88901247), or equivalent and clean the outside case (1) and the tip (2) of the
ignition lock cylinder.
Use the tube of GM Super Lube(R) with PTF, P/N 12371287 for U.S. (10953437 in Canada) as shown in the above illustration.
