VUE AWD V6-3.5L VIN 4 (2004)
Alignment: Service and Repair
Rear Wheel Alignment
Rear Camber Adjustment
1. Loosen the upper control arm-to-frame fastener enough to allow movement.
Important: The frame of the vehicle is slotted, turning the cam nut will move the camber in to the designated location.
2. Rotate the upper control arm-to-frame fastener in the direction necessary to the correct the camber measurement.
3. Snug the upper control arm-to-frame fastener, do not tighten at this time.
4. Reinspect the rear camber specifications and adjust as necessary.
Notice: Refer to Fastener Notice in Cautions and Notices.
5. Hold the nut and tighten the upper control arm-to-frame bolt.
^
Tighten the bolt to 110 Nm (81 ft. lbs.).
6. Repeat the procedure for the other rear wheel.
Rear Toe Adjustment
1. Loosen the toe link-to-frame fastener enough to allow for movement.
Important: The frame of the vehicle is slotted, a cam nut is available for service if required.
2. Rotate the toe link cam nut in the direction necessary to correct the toe angle.
3. Snug the toe link-to-frame fastener, do not tighten at this time.
4. Reinspect the rear toe specifications and adjust as necessary.
Notice: Refer to Fastener Notice in Cautions and Notices.
5. Hold the nut and tighten the link-to-frame fastener bolt.
