VUE AWD V6-3.5L VIN 4 (2004)
Steering Gear: Service and Repair
Power Steering Gear Replacement
^
Tools Required
-
J44015 Tie Rod installer
-
SA911OOC Tie Rod Separator
Removal Procedure
1. Raise and support the vehicle.
2. Remove the front tires.
3. Remove both outer tie rod to steering knuckle nuts. Discard the nuts.
Notice: Do not free the ball stud by using a pickle fork or a wedge-type tool. Damage to the seal or bushing may result.
Important: Hold the ball stud to prevent turning during removal of the nut.
4. Using the SA91 100C, separate the tie rods from the steering knuckles.
