VUE AWD V6-3.5L VIN 4 (2004)
Tie Rod Boot: Service and Repair
Rack and Pinion Boot Replacement On Vehicle
^
Tools Required
-
SA9164C Clamp Crimper
Removal Procedure
1. Raise and support the vehicle.
2. Remove the tire assembly.
3. Remove the outer tie rod.
4. Remove the jam nut.
5. Remove the spring from the boot, outer end.
6. Cut and remove the crimp clamp, inner end. Discard the clamp.
7. Unseat the boot from the steering gear and remove.
8. Clean the inner tie rod and boot contact area of grease and debris.
Installation Procedure
