VUE AWD V6-3.5L VIN 4 (2004)
If the crowfoot is not at 90° to the torque wrench, the torque value will not be correct, and the inner sleeve of bushing may still exhibit a noise
condition.
16.
Install new lower control arm bushing nut, P/N 11516382. Tighten to specification using a torque wrench and a 21 mm crowfoot at 90° to the
torque wrench.
Tighten
Tighten lower control arm bushing nut to 127 N.m (93 ft-lbs).
17.
Allow one hour of retaining compound (thread-locker) cure time before validating the repair.
Parts Information
Claim Information:
To receive credit for this repair during the warranty coverage period, submit a claim through the Saturn Dealer System for E9403 (Lower Control Arm -
Bushing Spindles).
Disclaimer
