VUE AWD V6-3.5L VIN 4 (2004)
Rear Knuckle: Service and Repair
Knuckle Bushing Replacement - Lower
Knuckle Bushing Replacement - Lower
^
Tools Required
-
J 45265 Bushing Remover/Installer
Removal Procedure
1. Raise and support the vehicle.
2. Remove the tire and wheel.
3. Loosen, do not remove the upper control arm to knuckle nut and bolt.
4. Remove the lower control arm to knuckle nut and bolt.
5. Separate the knuckle from the lower control arm.
6. Using the J 45265, remove the lower control arm bushing from the knuckle assembly.
Installation Procedure