VUE AWD V6-3.5L VIN 4 (2004)
Stabilizer Link: Service and Repair
Rear Suspension
The content of this article reflects the changes identified in TSB - 05-03-09-005
Stabilizer Shaft Link Replacement
Removal Procedure
1. Raise and support the vehicle.
2. Loosen the stabilizer bar clamp bolts.
Important: Hold the ball shaft secure with a TORX" bit, when removing the nut.
3. Remove the stabilizer link to stabilizer bar nut.
Important: When disconnecting the stabilizer link, hold the link with a wrench to prevent turning.
