VUE AWD V6-3.5L VIN 4 (2004)
4. Remove the stabilizer link to control arm nut.
5. Remove the stabilizer link from the vehicle.
Installation Procedure
1. Position the stabilizer link through the control arm.
Notice: Refer to Fastener Notice in Cautions and Notices.
Important: When connecting the stabilizer link, hold the link with a wrench to prevent turning.
2. Install the stabilizer link to control arm nut.
^
Tighten the nut to 15 Nm (11 ft. lbs.).
Important: Hold the ball shaft secure with a TORX bit, when installing the nut.
3. Install the stabilizer link to stabilizer bar nut.
^
Tighten the nut to 47 Nm (35 ft. lbs.).
