VUE AWD V6-3.5L VIN 4 (2004)
4. Remove the front wheel drive shaft spindle nut.
5. Support the wheel drive shaft with heavy mechanics wire or equivalent.
6. Remove and discard the wheel bearing/hub mounting bolts.
7. Remove the wheel bearing/hub assembly from the steering knuckle.
Installation Procedure
Notice: Refer to Fastener Notice in Cautions and Notices.
1. Install the wheel bearing/hub assembly to the steering knuckle.
2. Install the wheel bearing/hub mounting bolts.
^
Tighten the bolts to 130 Nm (96 ft. lbs.).
