VUE AWD V6-3.5L VIN 4 (2004)
Shifter A/T: Service and Repair
Shift Control Replacement
-
Tools Required
-
J 36346 Fascia Retainer Remover
Removal Procedure
Important: All shifter cable and park lock cable clips are one time usage only. Any service repair requiring cables to be disconnected from the
transaxle control cable bracket or shiftier assembly will require a cable clip replacement.
1. Disable the SIR system.
2. Remove the console.
3. Using the J 36346, disconnect the shiftier cable from the control assembly pin.
4. Remove the shiftier cable retainer clip and remove the cable from the control assembly. Discard the clip.
5. Disconnect the park lock cable assembly from the pin on the control assembly.
6. Depress the tab on the park lock cable and remove the cable from the control assembly. Discard the park lock cable clip.
