VUE AWD V6-3.5L VIN 4 (2004)
8. Rest the wire squarely on the threads of the fill plug hole.
9. Remove the wire and measure the distance between the bend and the fluid level as indicated by the witness mark.
Specification
-
The distance from the bend to the witness mark should be 8-17 mm (0.32-0.68 inch).
10. Adjust the fluid level as required by adding or removing fluid Saturn P/N 12378514.
11. Thoroughly clean the fill plug threads and apply sealer Saturn P/N 21485278 to the threads.
12. Install the rear drive module fill plug.
-
Tighten the fill plug to 35 Nm (26 ft. lbs.).
13. Lower the vehicle.