VUE AWD V6-3.5L VIN 4 (2004)
1. Thoroughly clean the pinion oil seal mounting surface of the RDM housing (1).
2. Using the J 44851, install a new pinion oil seal to the RDM.
3. Ensure that the seal flange seats squarely against the face of the RDM.
4. Install the dust deflector (2) to the drive, pinion flange (1).
Notice: Refer to Fastener Notice in Cautions and Notices.
5. Install the pinion flange (2) and nut (1) to the RDM.
