VUE AWD V6-3.5L VIN 4 (2004)
8. Place J22912-01 behind the support bearing.
9. Place the shaft in a press; then, support J22912-01 and press off the support bearing.
Center Bearing Cleaning and Inspection
1. Clean and inspect the universal joint cap bore (1).
2. Check the slinger (2) for bent lip or looseness.
3. Clean and inspect the splines (3).
4. Clean the snap ring groove (1).
5. Clean and inspect the yoke splines (2).
6. Clean and inspect the bearing mating surfaces (3).
Center Bearing Installation
Installation Procedure
-
Tool Required
-
J 44870 Yoke Installer
