VUE AWD V6-3.5L VIN 4 (2004)
Notice: Refer to Fastener Notice in Cautions and Notices.
6. Install the front propeller shaft mounting bolts.
-
Tighten the bolts to 25 Nm (19 ft. lbs.).
7. Align the index marks on the propeller shaft yoke flange and the rear drive module flange and install the propeller.
8. Thoroughly clean the yoke mounting bolts and apply thread-locker Saturn P/N 21005994 to the bolt threads.
9. Install the bolts to the propeller shaft yoke and rear drive module flange.
-
Tighten the bolts to 50 Nm (37 ft. lbs.).
10. Tighten the support bearing mounting bolts.
-
Tighten the bolts to 25 Nm (19 ft. lbs.).
11. Remove the support stands from the propeller shaft.
12. Install the guard loop to the vehicle underbody.
13. Install the bolts to the guard loop.
-
Tighten the bolts to 25 Nm (19 ft. lbs.).
14. Lower the vehicle.
