VUE FWD L4-2.4L (2008)
3. Install the CH-47672 clamp to the bushing. Align the clamp screws with the split portion of the bushing. Position the edge of the clamp where the
bushing chamfer blends with the straight section of the bushing. Alternately tighten the clamp screws until the split edges of the bushing are
parallel and almost touching.
Important: The frame insulator splits must be aligned in a forward and rearward position relative to the vehicle.
4. Install the frame insulator to the front frame opening with the insulator splits aligned in a forward and rearward direction relative to the vehicle.