saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Sunroof / Moonroof Motor|Service and Repair|Page 15786 > < Sun Shade|Service and Repair|Page 15782
Page 1
background image

Sunroof / Moonroof Motor: Service and Repair

Sunroof Motor/Actuator Replacement

Removal Procedure

1. Remove the headliner. Refer to Headlining Trim Panel Replacement  (See: Interior Moulding / Trim/Headliner/Service and Repair) .
2. Remove the sunroof window. Refer to Sunroof Window Replacement  (See: Sunroof / Moonroof Panel/Service and Repair) .

3. Disconnect the sunroof motor harness.
4. Remove the screws securing the sunroof actuator to the sunroof module.
5. Remove the sunroof motor.

Installation Procedure

1. Manually adjust the track to achieve a distance of (a) 44.5 mm (1.75 in) between the left slide and track bracket.
2. Manually adjust the track to achieve a distance of (a) 44.5 mm (1.75 in) between the right slide and track bracket.
3. Install the sunroof motor to the sunroof module.

Sunroof / Moonroof Motor|Service and Repair|Page 15786 > < Sun Shade|Service and Repair|Page 15782