VUE FWD L4-2.4L (2008)
24. Connect the engine wiring harness electrical connector (1) to the ECT sensor.
25. Install the HO2S electrical connector rosebud clip to the thermostat housing.
26. Install the battery tray. Refer to Battery Tray Replacement (2.4L LAT-2.4L) () .
27. Verify the drain valves at the radiator and water pump are closed.
28. Lower the vehicle.
29. Fill the cooling system. Refer to Cooling System Draining and Filling (Static Fill) (See: Service and Repair)Cooling System Draining and Filling
(GE 47716 Fill) (See: Service and Repair) .
