VUE FWD L4-2.4L (2008)
Engine Mount: Service and Repair
Powertrain Mount Balance - Lower Mount
Powertrain Mount Balance - Lower Mount
Important: Follow the balance procedure steps listed below. Powertrain mounts must be tightened in sequence.
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
2. Loosen the front transaxle mount through bolt.
3. Loosen the rear transaxle mount through bolt.
4. Shake the powertrain vigorously from front to rear and allow the powertrain to settle.