VUE FWD L4-2.4L (2008)
Intake Manifold: Service and Repair
Intake Manifold Replacement
Intake Manifold Replacement (LE5 2.4L)
Removal Procedure
1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement (See: ) .
2. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (See: Tune-up and Engine Performance Checks/Air Cleaner
Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair/Air Cleaner Outlet Duct Replacement) .
3. Disconnect the engine harness electrical connector (1) from the throttle actuator control (TAC).
4. Disconnect the engine harness electrical connector (2) from the fuel injector harness.
5. Disconnect the engine harness electrical connector from the manifold absolute pressure (MAP) sensor.
6. Disconnect the engine harness clips (1 and 3) from the intake manifold.
7. Disconnect the engine harness clip (2) from the oil level indicator tube.