VUE FWD L4-2.4L (2008)
11. Connect the engine harness electrical connector (1) to the HO2S (2).
12. Install the exhaust manifold heat shield (1).
13. Install the exhaust manifold heat shield studs (2).
Tighten the studs to 22 N.m (16 lb ft).
11. Connect the engine harness electrical connector (1) to the HO2S (2).
12. Install the exhaust manifold heat shield (1).
13. Install the exhaust manifold heat shield studs (2).
Tighten the studs to 22 N.m (16 lb ft).