VUE FWD L4-2.4L (2008)
Important: Inspect the intake CMP sensor for damage, replace as necessary.
1. Lubricate the intake CMP sensor O-ring seal with clean engine oil.
2. Install the intake CMP sensor.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Install the intake CMP sensor bolt.
Tighten the bolt to 10 N.m (89 lb in).
4. Connect the engine wiring harness electrical connector (1) to the intake CMP sensor.
