VUE FWD L4-2.4L (2008)
Fuel Line Coupler: Service and Repair
Plastic Collar Quick Connect Fitting Service
Plastic Collar Quick Connect Fitting Service
Removal Procedure
Caution: Refer to Gasoline/Gasoline Vapors Caution (See: Fuel/Service Precautions) .
Important: There are several types of plastic collar fuel and evaporative emission quick connect fittings that may be used on this vehicle.
*
Bartholomew (1)
*
Q release (2)
*
Squeeze to release (3)
*
Sliding retainer (4)
*
Push down TI (5)
The following instructions apply to all of these types of fittings except where indicated.
1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (With CH 48027-100) (See: Fuel Filter/Fuel Pressure Release/Service and
Repair/Fuel Pressure Relief (With CH 48027-100))Fuel Pressure Relief (Without CH 48027-100) (See: Fuel Filter/Fuel Pressure Release/Service
and Repair/Fuel Pressure Relief (Without CH 48027-100)) .
Caution: Wear safety glasses when using compressed air, as flying dirt particles may cause eye injury.
2. Using compressed air, blow any dirt out of the quick connect fitting.