VUE FWD L4-2.4L (2008)
15. Connect the chassis fuel feed line quick connect fitting (3) to the fuel rail. Refer to Metal Collar Quick Connect Fitting Service (See: Fuel Line
Coupler/Service and Repair/Metal Collar Quick Connect Fitting Service) .
16. Connect the chassis EVAP line quick connect fitting (2) to the EVAP canister purge solenoid valve. Refer to Plastic Collar Quick Connect Fitting
Service (See: Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service) .
17. Install the chassis fuel feed line clip (1) to the fuel line bracket.
18. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (With LAT-2.4L) (See: Starting and
Charging/Battery/Battery Cable/Service and Repair)Battery Negative Cable Disconnection and Connection (Without LAT-2.4L) (See: Starting
and Charging/Battery/Battery Cable/Service and Repair) .
19. Use the following procedure in order to inspect for leaks:
1. Turn the ignition ON, with the engine OFF, for 2 seconds.
2. Turn the ignition OFF for 10 seconds.
3. Turn the ignition ON, with the engine OFF.
4. Inspect for fuel leaks.
20. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair) .
