VUE FWD L4-2.4L (2008)
12. Install the coded lock cylinder assembly into the door lock cylinder housing so the cut out area in the back of the lock cylinder assembly (4) lines
up with the cut out area in the back of the door lock cylinder housing (9).
13. Install the door lock cylinder housing cap (7) and crimp the cap into position in 2 areas at 1 o'clock and 7 o'clock when looking at the face of the
assembly in car position.
14. Install the return spring (10), inner winding end first, in the smaller notch in the lock cylinder housing.
15. Using a small flat-blade tool, pull the outer winding of the spring clockwise until it engages with the larger notch in the lock cylinder housing (1).
Ensure the return spring is seated fully in the opening.
