VUE FWD L4-2.4L (2008)
Manifold Pressure/Vacuum Sensor: Service and Repair
Manifold Absolute Pressure Sensor Replacement
Removal Procedure
1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (See: Fuel Delivery and Air Induction/Air Cleaner Housing/Air
Cleaner Fresh Air Duct/Hose/Service and Repair/Air Cleaner Outlet Duct Replacement)
2. Remove the evaporative emission (EVAP) canister purge tube from the intake manifold. Refer to Plastic Collar Quick Connect Fitting Service (
See: Fuel Delivery and Air Induction/Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service) .
3. Reposition the EVAP canister purge tube out of the way.
4. Disconnect and reposition the fuel injector wiring harness out of the way .
5. Disconnect the engine harness electrical connector from the manifold absolute pressure (MAP) sensor.
6. Remove the MAP sensor and seal.
