VUE FWD L4-2.4L (2008)
Fuel Level Sensor: Service and Repair
Secondary Fuel Level Sensor Replacement
Secondary Fuel Level Sensor Replacement
Removal Procedure
Important: There are 2 fuel level sensor assemblies in the fuel tank. There is one located on each fuel pump module. The fuel level sensors are
NOT the same for each of the fuel pump modules.
1. Remove the fuel pump module. Refer to Fuel Tank Fuel Pump Module Replacement - Secondary (See: Powertrain Management/Fuel Delivery
and Air Induction/Fuel Pump/Service and Repair) .
2. Disconnect the fuel level sender electrical connector (1) from the fuel tank fuel pump module cover.
3. Remove the fuel level sensor wiring from the retaining feature (2) on the fuel tank fuel pump module.
4. Push in the fuel level sensor retainers (1), in order to disengage the retainers from the module.