VUE FWD L4-2.4L (2008)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
1. Install the engine oil pressure sensor.
Tighten the sensor to 22 N.m (16 lb ft).
2. Connect the engine wiring harness electrical connector (2) to the oil pressure sensor.
3. Install the starter. Refer to Starter Motor Replacement (LE5 2.4L and LAT-2.4L) (See: Starting and Charging/Starting System/Starter
Motor/Service and Repair).