VUE FWD L4-2.4L (2008)
Important: Hold the ball shaft secure with a TORX(R) bit, when installing the nut.
3. Install the stabilizer link to stabilizer shaft nut.
Tighten the nut to 50 N.m (37 lb ft).
4. Tighten the loose stabilizer shaft clamp bolts.
Tighten the bolts to 70 N.m (52 lb ft).
5. Install the rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair) .
6. Lower the vehicle.