VUE FWD L4-2.4L (2008)
Important: Do not allow the stabilizer link ball stud to rotate while installing the link nut.
4. Connect the stabilizer link to the strut.
Tighten the nut to 65 N.m (48 lb ft).
5. Install the brake hose bracket to the strut assembly.
Tighten the brake bracket bolt to 15 N.m (11 lb ft).
6. Install the wheel and tire. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair) .
7. Lower the vehicle.
8. Perform a wheel alignment. Refer to Wheel Alignment Measurement (See: Alignment/Service and Repair/Wheel Alignment Measurement) .
Suspension Shock/Strut Disposal
Suspension Shock/Strut Disposal
Caution: Use the proper eye protection when drilling to prevent metal chips from causing physical injury.
