VUE FWD L4-2.4L (2008)
Shift Cable: Service and Repair
4T45-E - Automatic Transaxle
Floor Shift Control Cable Replacement
Removal Procedure
1. Disconnect the range select cable (2) from the range select lever (1).
2. Release the range select cable retaining clip (3) and remove the cable from the range select cable bracket (4).
3. Remove the front floor console extension panel. Refer to Front Floor Console Extension Panel Replacement (See: Body and Frame/Interior
Moulding / Trim/Console/Service and Repair) .
4. Remove the range select cable (2) from the automatic transmission range select lever pin.
5. Remove the range select cable (1) from the automatic transmission range select lever housing.