VUE FWD L4-2.4L (2008)
17. Using a dial indicator, for at least two revolutions, measure flywheel runout.
Maximum runout: 0.15 mm (0.006 in)
18. Repair or replace the flywheel if not within specification.
19. Using a straight edge and a feeler gage, inspect the flywheel for warpage.
Maximum warpage: 0.15 mm (0.006 in)
20. If the flywheel is being replaced, remove and discard the flywheel-to-crankshaft bolts and remove the flywheel.
