VUE FWD L4-2.4L (2008)
Important: Prior to installing the seal, inspect theSA9113T for nicks or burrs that may damage the seal lip.
3. Using the J 44385 and the J 8092 , install the axle seal. Ensure the seal is lined up with the bore during installation.
4. Install the intermediate drive shaft. Refer to Intermediate Shaft Replacement (LE5 2.4L) (See: Drive Axles, Bearings and Joints/Axle Shaft
Assembly/Service and Repair/Intermediate Shaft Replacement)Intermediate Shaft Replacement (LY7 3.6L) (See: Drive Axles, Bearings and
Joints/Axle Shaft Assembly/Service and Repair/Intermediate Shaft Replacement) .
5. Check the transmission fluid level. Refer to Transmission Fluid Check (See: Service and Repair/Transmission Fluid Check) .
6. Install the wheel and tire. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair) .
7. Lower the vehicle.