VUE FWD L4-2.4L Hybrid (2007)
Cellular Phone Microphone: Service and Repair
Mobile Telephone Microphone Replacement
Removal Procedure
1. Using a small, flat-bladed tool, pry at the forward edge of the reading lamp cover to disengage the forward clips. Slide the cover forward to
disengage the rearward hooks.
2. Disconnect the OnStar(R) microphone harness.
3. Depress the microphone snap tabs.
4. Push on the rear face of the microphone to remove the microphone from the cover.
Installation Procedure
1. Position the OnStar(R) microphone in the cover.
2. Install the microphone by snapping into place.
3. Connect the wiring harness.
4. Snap the cover to engage the snap tabs.
5. Slide the cover rearward to engage the rear hooks.
6. Snap the reading lamp cover into place.
