VUE FWD L4-2.4L Hybrid (2007)
8. Install the front transaxle mount through bolt.
Tighten the bolt to 110 N.m (81 lb ft).
9. Install the rear transaxle mount-to-frame bolts.
Tighten the bolts to 50 N.m (37 lb ft).
10. Install the stabilizer shaft clamp.
Tighten the bolts to 50 N.m (37 lb ft).
11. Tighten the frame-to-body bolts.
Tighten the bolts to 155 N.m (114 lb ft).
12. Install the front air dam fasteners.
13. Install the side splash shield-to-frame fasteners.
14. Install the front wheels. Refer to Tire and Wheel Removal and Installation .
15. Lower the vehicle.
16. Remove the engine support fixture. Refer to Engine Support Fixture .
17. Unsecure the radiator from the upper radiator support.
18. Align the front suspension. Refer to Front Toe Adjustment .