VUE FWD L4-2.4L Hybrid (2007)
6. Connect the recliner handle to the recliner cable.
Notice: Refer to Fastener Notice .
7. Install the recliner handle screw.
Tighten the screw to 2.5 N.m (22 lb in).
8. Continue to install the seat back trim cover. Engage the hook and loop locations by pressing firmly.
9. Install the seat back assembly to the recliner assembly and secure with the bolts.
Tighten the bolts to 50 N.m (37 lb ft).
10. Connect the rear seat back J-hook retainers.