VUE FWD L4-2.4L Hybrid (2007)
18. Secure the cable fitting to the park brake lever bracket. Attempt to pull the park brake cable free of the lever bracket, to ensure that the retaining
tabs on the fitting are properly secured.
19. Install the cable end (2) to the cable equalizer.
20. Position park brake cable to routing tabs on vehicle interior floor.
21. Secure park brake cable to floor by folding routing tabs over park brake cable.
22. Reposition the carpet to the installed position.
23. Install the rear carpet retainers.
24. Adjust the park brake cable tension.
25. Install the front floor console.
26. Enable the SIR system.