VUE FWD L4-2.4L Hybrid (2007)
2. Install the park brake lever assembly mounting nuts.
Tighten the nuts to 25 N.m (18 lb ft).
3. Secure the rear cable fittings to the park brake lever bracket. Attempt to pull the park brake cables free of the lever bracket, to ensure that the
retaining tabs on the fittings are properly secured.
4. Install the cable ends to the cable equalizer.
5. Connect the electrical connector to the park brake warning lamp switch.
6. Adjust the park brake cable tension.
7. Install the front floor console.
8. Enable the SIR system.
