VUE FWD L4-2.4L Hybrid (2007)
6. Remove the crankshaft balancer.
Installation Procedure
1. Position the crankshaft balancer.
2. Install a NEW crankshaft balancer bolt.
3. Install the J 38122-A (1), and a breaker bar to the balancer in order to prevent the balancer from rotating while tightening the bolt.
Notice: Refer to Fastener Notice.
4. Tighten the crankshaft balancer bolt.
Tighten the bolt to 100 N.m (74 lb ft) plus an additional 125 degrees using the J 45059.
5. Install the engine splash shield.
6. Install the drive belt.