VUE FWD L4-2.4L Hybrid (2007)
Crankshaft Main Bearing Seal: Service and Repair
Crankshaft Rear Oil Seal Replacement
Tools Required
J 42067 Rear Main Seal Installer
Removal Procedure
1. Remove the flywheel.
Important: Do not damage the outside diameter of the crankshaft or chamber with any tool.
2. Pry out the crankshaft rear oil seal using a flat-bladed tool.
Installation Procedure
1. Using the J 42067, install a NEW crankshaft real oil seal.
2. Install the flywheel.
