VUE FWD L4-2.4L Hybrid (2007)
7. Reset the timing chain tensioner by performing the following steps:
*
Rotate the tensioner plunger 90 degrees in its bore and compress the plunger.
*
Rotate the tensioner back to the original 12 o'clock position and insert a paper clip through the hole in the plunger body and into the hose in the
tensioner plunger.
8. Install the balance shaft drive chain tensioner and bolts.
Tighten the bolts to 10 N.m (89 lb in).
9. Remove the paper clip from the balance shaft drive chain tensioner.
10. Install the timing chain crankshaft sprocket to the crankshaft with the timing mark in the 5 o'clock position.
