VUE FWD L4-2.4L Hybrid (2007)
Catalytic Converter: Service and Repair
Catalytic Converter Replacement (2.2L (L61) and 2.4L (LAT))
Removal Procedure
Caution: Ensure that the vehicle is properly supported and squarely positioned. To help avoid personal injury when a vehicle is on a hoist,
provide additional support for the vehicle on the opposite end from which the components are being removed.
Notice: Excessive flexing of the exhaust pipe may damage the flex coupling. Limit flexing to 12 degrees.
1. Remove the bank 2 heated oxygen sensor (HO2S).
*
Heated Oxygen Sensor 2 Replacement for the 2.2L engine
*
Heated Oxygen Sensor 2 Replacement for the 2.4L engine
2. Remove the catalytic converter to muffler assembly nuts and separate the flange from the studs.
3. Remove the catalytic converter to exhaust manifold nuts.