VUE FWD L4-2.4L Hybrid (2007)
1. Install the blower motor resistor to the blower case assembly.
Notice: Refer to Fastener Notice.
2. Install the blower motor resistor screws to the blower case assembly.
Tighten the screws to 1 N.m (9 lb in).
3. Install the blower motor to the blower case assembly.
4. Install the blower motor screws to the blower case assembly.
Tighten the screws to 1 N.m (9 lb in).
5. Install the HVAC module wire harness from the blower case assembly.
6. Install the air inlet assembly.
7. Install the evaporator core.
