VUE FWD L4-2.4L Hybrid (2007)
7. Install the HVAC module bolts to the right side of the cross car beam.
8. Push up on the right side of the HVAC module while tightening the HVAC module bolts to the cross car beam.
Tighten the bolts to 8 N.m (71 lb in).
9. Install the HVAC module bolt to the left side of the cross car beam.
Tighten the bolt to 8 N.m (71 lb in).
10. Install the HVAC module nuts to the left side and center of the cross car beam.
Tighten the nuts to 8 N.m (71 lb in).
11. Install the defroster duct to the HVAC module.
12. Install the defroster duct nuts to the HVAC module.
Tighten the nuts to 2.5 N.m (22 lb in).
13. Install the defroster duct retainer to the cross car beam.
14. Connect the I/P wire harness clips to the HVAC module.
