saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Hybrid System - MIL/Battery Lamp ON/DTC's P1A5A/P1A59|Page 4377 > < Hybrid System - MIL/Battery Lamp ON/DTC's P1A5A/P1A59|Page 4375
Page 4
background image

Fold down the rear seat back.

Remove the rear seat rear bolts.

Partially remove the left side rear quarter lower trim panel

Disconnect the generator battery wiring harness electrical connector (1) from the body wiring harness electrical connector (2).

Remove the 36 volt negative battery cable ground nut (8) and cable from body stud.

Remove the cable shield lead nut (3) and cable lead (4) from the carrier.

Remove the 36 volt positive battery cable lead nut (6).

Remove the 36 volt positive battery cable lead (5).

Remove the generator battery front bolts (1) at the shock towers.

Pull the generator battery carrier towards the rear of the vehicle and carefully remove the carrier from the vehicle. Place the carrier assembly on a

Hybrid System - MIL/Battery Lamp ON/DTC's P1A5A/P1A59|Page 4377 > < Hybrid System - MIL/Battery Lamp ON/DTC's P1A5A/P1A59|Page 4375